RESTRICTIONS |
DESCRIPTION |
USED IN |
REF POINT |
registration |
UE Registration |
n2 |
N1/N2 |
deregistration |
UE De-Registration |
n2 |
N1/N2 |
pdu_session_establish |
PDU Session Establishment |
n2 |
N1/N2 |
pdu_session_release |
PDU Session Release |
n2 |
N1/N2 |
handover |
Performs an N2 Handover. This event must be triggered on the target gNB node. |
n2 |
N1/N2 |
xn_handover |
Performs an Xn Handover. This event must be triggered on the target gNB node. |
n2 |
N1/N2 |
ue_context_release_request_user_inactivity |
Initiates a UE Context Release Request due to User Inactivity |
n2 |
N1/N2 |
ue_context_release_request_ng_ran_generated_reason |
Initiates a UE Context Release Request due to NG-RAN Reason Inactivity |
n2 |
N1/N2 |
ue_context_release_request_ims_fallback |
Initiates a UE Context Release Request due to IMS voice EPS fallback or RAT fallback triggered |
n2 |
N1/N2 |
ue_context_release_command_successful_handover |
Initiates a UE Context Release Command from the Server due to Successful Handover |
n2 |
N1/N2 |
service_request |
Initiates a Service Request |
n2 |
N1/N2 |
service_request_emergency |
Initiates a Service Request for Emergency |
n2 |
N1/N2 |
service_request_emergency_fallback |
Initiates a Service Request for Emergency Fallback |
n2 |
N1/N2 |
add_rule |
Initiates adding a predefined rule. |
n2 |
N1/N2 |
qos_mod |
Initiates modification of qos parameters for a QoS Rule. |
n2 |
N1/N2 |
delete_rule |
Initiates removal of a QoS Rule. |
n2 |
N1/N2 |
ue_radio_capability_info_indication |
Initiate a UE Radio Capability Info Indication Check. |
n2 |
N1/N2 |
ran_configuration_update |
Sends an RAN Configuration Update to the AMF. |
n2 |
N1/N2 |
pws_restart_indication |
Sends an PWS Restart Indication from gNB to the AMF. |
n2 |
N1/N2 |
pws_failure_indication |
Sends an PWS Failure Indication from gNB to the AMF. |
n2 |
N1/N2 |
send_sms |
Sends an SMS message from the UE over N2. |
n2 |
N1/N2 |
ran_configuration_transfer |
Sends an RAN Configuration Transfer message from the gNB over N2 to the AMF. |
n2 |
N1/N2 |
cell_traffic_trace |
Sends an Cell Traffic Trace from the gNB over N2 to the AMF. |
n2 |
N1/N2 |
trace_failure_indication |
Sends an Trace Failure Indication from the gNB over N2 to the AMF. |
n2 |
N1/N2 |
lpp_provide_capabilities |
Sends an LPP Provide Capabilities message toward the AMF. |
n2 |
N1/N2 |
lpp_request_assistance |
Sends an LPP Request Assistance message toward the AMF. |
n2 |
N1/N2 |
lpp_provide_location |
Sends an LPP Provide Location message toward the AMF. |
n2 |
N1/N2 |
initial_context_setup_failure |
Sends an Initial Context Setup Failure Message the AMF. This would generally only be done
if the received Initial Context Setup Request was capatured. This is generally only performed
for doing negative testing and will cause unpredicatble behvaior within the UE/gNB |
n2 |
N1/N2 |
nas_non_delivery |
Sends a NAS Non-Delivery message to the AMF. This would generally only be done
if the received NAS message was capatured. This is generally only performed
for doing negative testing and could cause unpredicatble behvaior within the UE/gNB |
n2 |
N1/N2 |
qos_flow_mobility_to_master |
Intiates a QoS Flow Mobility procedure to master gNB. |
n2 |
N1/N2 |
qos_flow_mobility_to_secondary |
Intiates a QoS Flow Mobility procedure to secondary gNB. |
n2 |
N1/N2 |
location_report |
Sends an NGAP Location Report message toward the AMF. |
n2 |
N1/N2 |
location_reporting_failure |
Sends an NGAP Location Reporing Failure Indication message toward the AMF. |
n2 |
N1/N2 |
nrppa_request |
Sends a static UE Associated NRPPa request message to the AMF. |
n2 |
N1/N2 |
nrppa_response |
Sends a static UE Associated NRPPa response message to the AMF. |
n2 |
N1/N2 |
non_ue_associated_nrppa_request |
Sends a static Non UE Associated NRPPa request message to the AMF. |
n2 |
N1/N2 |
non_ue_associated_nrppa_response |
Sends a static Non UE Associated NRPPa response message to the AMF. |
n2 |
N1/N2 |
reset |
Resets the current transaction by sending an NG Reset message from the gNB. |
n2 |
N1/N2 |
reset_all |
Perform an NG Reset with Reset All from the gNB. |
n2 |
N1/N2 |
none |
Stops the referenced node action. Note: Application (app::xxx) should never be used with event::none in a node-specific command. |
|
N/A |